1、离子静电消除器除静电原理:生成空气离子,效果到静电源上中和静电。
2、可以让空气电离的途径:A、强电场的条件下空气电晕电离,产生正负离子;B、A射线和β射线效果空气分子使之成为空气离子;C、高能射线(X射线)效果空气分让基电离;
空气离子的特性
1、空气离子不同于溶液离子,它需要必定的能量才华生成,且通常以分子团形式存在;
2、空气离子在天然环境中也存在,仅仅浓度十分低; 3、在洁净的空气傍边空气离子的寿命在几秒钟到几分钟之间; 4、正负离子碰到一起会互相中和;
离子静电消除器运用傍边需要考虑的几个问题
1、效果距离考虑两方面因素:A、距离越近消除静电的速度越快;B、不同类型的离子静电消除器有用距离不同。
2、强电场电离方法的离子静电消除器放电针是最简单老化和危害的部件,定时的清洁和保养能确保设备有用。
3、消除静电速度:考量目标——散失速度,一般用CPM测量其1000V-100V的散失速度;
4、离子平衡度:离子不平衡会让效果区域内的物体带上表龟,因此必须控制。离子不平衡只出现在电晕电离的离子化设备中;
5、其他的考虑:不同类型的离子化设备适用的对象不同
各种类型的离子风机
1、交流式离子风机:
A、设计简单,成本低;
B、稳定
C、正弦波的电离功率较低,不适于需要快速中和的场合; D、不同的正页电离能量使电离平衡作业困难;
E、正负离子交替产生周期为1/100或1/120秒(50或60HZ)离子的天然中和会进一步下降功率,需要高风补偿;
F、因为功率低,需要更大的电压产生满足的离子,会造成许多颗料,晦气于严峻的无尘环境运用。
2、直流式离子风机
A、连续的高压运用电离功率高,能处理快速中和需求; B、可以运用较低的电压,适宜无尘车间运用; C、可以运用主动测量和反应控制电离平衡; D、需要凌乱的控制电路来确保正负离子数量平衡。
3、脉冲直流式离子风机
A、脉冲产生的离子群减少天然中和的情况。容许离子机离开维护对象较远(能过到5米);
B、最常用于无尘车间或许要低空气活动的场合; C、脉冲时间可以进调整,以适宜环境的气流或距离要求;
D、脉冲波引发“voltage swing”电压改变,可能对某些器件晦气。
4、高频交流式离子风机
A、3000HZ以上高频交流方法可以大幅度前进交流电离功率; B、可运用较低的电离电压; C、离子平衡度杰出;
D、放电针不需要成组,尺寸可以做得很小 E、适宜在无尘车间运用 F、效果距离短、须风补偿。
0769-85900834